Mare and foal horses SVG
A mare standing with her foal in front of her, both in profile. They overlap at the legs, so the two horses cut as one piece.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 87 mm (3.94 × 3.42 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 695 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 356 curve and line segments |
Measured from the file. PNG: 2,000 × 1,746 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.87 in (25 × 22 mm) | 0.69 mm | 177 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.74 in (51 × 44 mm) | 1.4 mm | 353 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.6 in (76 × 66 mm) | 2.1 mm | 530 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.47 in (102 × 88 mm) | 2.7 mm | 706 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.21 in (152 × 132 mm) | 4.1 mm | 1,059 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.94 in (203 × 176 mm) | 5.5 mm | 1,412 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.42 in (305 × 265 mm) | 8.2 mm | 2,118 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Rocking horse 
Dala horse 
Horse head outline 
Horse outline 
Horse head with a flowing mane 
Standing horse silhouette 
Running horse 
Rearing horse 