Free Hello SVG

Hello in Amatic SC SVG

Hello in Amatic SC, as a solid black shape — Hello in Amatic SC. The preview is the SVG file itself.

“Hello” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.32 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	6: 5 outer edges and 1 cut-out
Cut length	900 mm at this size
Narrowest part	2.2 mm at this size
Nodes	225 curve and line segments

Measured from the file. PNG: 2,000 × 1,212 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.56 mm	229 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)	1.1 mm	457 mm	40	Vinyl, card and thin sheet
3 × 1.77 in (76 × 45 mm)	1.7 mm	686 mm	18	Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)	2.2 mm	914 mm	8	Vinyl, card and thin sheet
6 × 3.54 in (152 × 90 mm)	3.4 mm	1,372 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.72 in (203 × 120 mm)	4.5 mm	1,829 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.08 in (305 × 180 mm)	6.7 mm	2,743 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello SVG files

← Hello in Alfa Slab One All 12 Hello designs Hello in block capitals →