Free Hello SVG

Hello with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello with a swash underline, as a solid black shape
Hello with a swash underline. The preview is the SVG file itself.

“Hello” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 44 mm (3.94 × 1.74 in), scales to any size
Pieces3 separate pieces
Outlines to cut8: 3 outer edges and 5 cut-outs
Cut length848 mm at this size
Narrowest part2.9 mm at this size
Nodes181 curve and line segments

Measured from the file. PNG: 2,000 × 929 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.74 mm215 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.89 in (51 × 23 mm)1.5 mm431 mm55Vinyl, card and thin sheet
3 × 1.33 in (76 × 34 mm)2.2 mm646 mm21Vinyl, card and thin sheet
4 × 1.77 in (102 × 45 mm)2.9 mm862 mm12Vinyl, card and thin sheet
6 × 2.66 in (152 × 68 mm)4.4 mm1,292 mm4Any material, including 3 mm wood and acrylic
8 × 3.54 in (203 × 90 mm)5.9 mm1,723 mm3Any material, including 3 mm wood and acrylic
12 × 5.32 in (305 × 135 mm)8.8 mm2,585 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello SVG files

← Hello in block capitals All 13 Hello designs Hello with hearts →