Free Hello SVG

Hello with hearts SVG

Hello with hearts, as a solid black shape — Hello with hearts. The preview is the SVG file itself.

“Hello” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.59 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	10: 8 outer edges and 2 cut-outs
Cut length	802 mm at this size
Narrowest part	1.8 mm at this size
Nodes	204 curve and line segments

Measured from the file. PNG: 2,000 × 1,342 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.46 mm	204 mm	140	Too fine for most machines
2 × 1.32 in (51 × 33 mm)	0.91 mm	407 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)	1.4 mm	611 mm	15	Vinyl, card and thin sheet
4 × 2.63 in (102 × 67 mm)	1.8 mm	815 mm	8	Vinyl, card and thin sheet
6 × 3.95 in (152 × 100 mm)	2.7 mm	1,222 mm	2	Vinyl, card and thin sheet
8 × 5.26 in (203 × 134 mm)	3.7 mm	1,630 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.9 in (305 × 201 mm)	5.5 mm	2,444 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello SVG files

← Hello with a swash underline All 12 Hello designs Hello outline lettering →