Free Hello SVG

Hello with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello with a drop shadow, in layered colours
Hello with a drop shadow. The preview is the SVG file itself.

“Hello” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 38 mm (3.94 × 1.48 in), scales to any size
Pieces3 separate pieces
Outlines to cut15: 3 outer edges and 12 cut-outs
Cut length1,162 mm at this size
Narrowest part5.7 mm at this size
Nodes247 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 800 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)1.4 mm295 mm210Vinyl, card and thin sheet
2 × 0.75 in (51 × 19 mm)2.9 mm590 mm60Vinyl, card and thin sheet
3 × 1.13 in (76 × 29 mm)4.3 mm885 mm27Any material, including 3 mm wood and acrylic
4 × 1.5 in (102 × 38 mm)5.8 mm1,181 mm14Any material, including 3 mm wood and acrylic
6 × 2.26 in (152 × 57 mm)8.7 mm1,771 mm4Any material, including 3 mm wood and acrylic
8 × 3.01 in (203 × 76 mm)12 mm2,361 mm3Any material, including 3 mm wood and acrylic
12 × 4.51 in (305 × 115 mm)17 mm3,542 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello SVG files

← Hello stencil plate All 13 Hello designs Hello with a heart →