Free Hello SVG

Hello in block capitals SVG

Hello in block capitals, as a solid black shape — Hello in block capitals. The preview is the SVG file itself.

“HELLO” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.58 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	6: 5 outer edges and 1 cut-out
Cut length	722 mm at this size
Narrowest part	5.6 mm at this size
Nodes	56 curve and line segments

Measured from the file. PNG: 2,000 × 850 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	1.4 mm	183 mm	200	Vinyl, card and thin sheet
2 × 0.8 in (51 × 20 mm)	2.8 mm	367 mm	60	Vinyl, card and thin sheet
3 × 1.21 in (76 × 31 mm)	4.3 mm	550 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.61 in (102 × 41 mm)	5.7 mm	734 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.41 in (152 × 61 mm)	8.5 mm	1,100 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.22 in (203 × 82 mm)	11 mm	1,467 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.82 in (305 × 123 mm)	17 mm	2,201 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello SVG files

← Hello in Amatic SC All 12 Hello designs Hello with a swash underline →