Free Hello Sunshine SVG

Hello Sunshine in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Sunshine in Lilita One, as a solid black shape
Hello Sunshine in Lilita One. The preview is the SVG file itself.

“Hello Sunshine” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 47 mm (3.94 × 1.85 in), scales to any size
Pieces14 separate pieces
Outlines to cut17: 14 outer edges and 3 cut-outs
Cut length803 mm at this size
Narrowest part2.9 mm at this size
Nodes234 curve and line segments

Measured from the file. PNG: 2,000 × 979 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.74 mm204 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.94 in (51 × 24 mm)1.5 mm408 mm50Vinyl, card and thin sheet
3 × 1.41 in (76 × 36 mm)2.2 mm612 mm21Vinyl, card and thin sheet
4 × 1.88 in (102 × 48 mm)2.9 mm816 mm10Vinyl, card and thin sheet
6 × 2.81 in (152 × 71 mm)4.4 mm1,224 mm4Any material, including 3 mm wood and acrylic
8 × 3.75 in (203 × 95 mm)5.9 mm1,632 mm3Any material, including 3 mm wood and acrylic
12 × 5.63 in (305 × 143 mm)8.8 mm2,448 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Sunshine SVG files

← Hello Sunshine in Kaushan Script All 13 Hello Sunshine designs Hello Sunshine in Alfa Slab One →