Free Hello Sunshine SVG

Hello Sunshine stencil plate SVG

Hello Sunshine stencil plate, as a solid black shape — Hello Sunshine stencil plate. The preview is the SVG file itself.

A rounded plate with “HELLO SUNSHINE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 68 mm (3.94 × 2.68 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	1,396 mm at this size
Narrowest part	1.8 mm at this size
Nodes	170 curve and line segments

Measured from the file. PNG: 2,000 × 1,385 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.68 in (25 × 17 mm)	0.46 mm	355 mm	130	Too fine for most machines
2 × 1.36 in (51 × 35 mm)	0.91 mm	709 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.04 in (76 × 52 mm)	1.4 mm	1,064 mm	15	Vinyl, card and thin sheet
4 × 2.72 in (102 × 69 mm)	1.8 mm	1,418 mm	8	Vinyl, card and thin sheet
6 × 4.08 in (152 × 104 mm)	2.7 mm	2,128 mm	2	Vinyl, card and thin sheet
8 × 5.44 in (203 × 138 mm)	3.7 mm	2,837 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.16 in (305 × 207 mm)	5.5 mm	4,255 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Sunshine SVG files

← Hello Sunshine outline lettering All 12 Hello Sunshine designs Hello Sunshine with a drop shadow →