Free Hello Sunshine SVG

Hello Sunshine in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Sunshine in Amatic SC, as a solid black shape
Hello Sunshine in Amatic SC. The preview is the SVG file itself.

“Hello Sunshine” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 75 mm (3.94 × 2.96 in), scales to any size
Pieces13 separate pieces
Outlines to cut14: 13 outer edges and 1 cut-out
Cut length1,349 mm at this size
Narrowest part1.2 mm at this size
Nodes431 curve and line segments

Measured from the file. PNG: 2,000 × 1,523 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.3 mm343 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.61 mm685 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.26 in (76 × 57 mm)0.91 mm1,028 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.01 in (102 × 76 mm)1.2 mm1,371 mm6Vinyl, card and thin sheet
6 × 4.51 in (152 × 115 mm)1.8 mm2,056 mm2Vinyl, card and thin sheet
8 × 6.02 in (203 × 153 mm)2.4 mm2,741 mm1Vinyl, card and thin sheet
12 × 9.02 in (305 × 229 mm)3.7 mm4,112 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Sunshine SVG files

← Hello Sunshine in Alfa Slab One All 13 Hello Sunshine designs Hello Sunshine in block capitals →