Free Hello Sunshine SVG

Hello Sunshine in block capitals SVG

Hello Sunshine in block capitals, as a solid black shape
Hello Sunshine in block capitals. The preview is the SVG file itself.

“HELLO SUNSHINE” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 71 mm (3.94 × 2.78 in), scales to any size
Pieces13 separate pieces
Outlines to cut14: 13 outer edges and 1 cut-out
Cut length1,530 mm at this size
Narrowest part2.9 mm at this size
Nodes168 curve and line segments

Measured from the file. PNG: 2,000 × 1,437 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.74 mm389 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.41 in (51 × 36 mm)1.5 mm777 mm35Vinyl, card and thin sheet
3 × 2.12 in (76 × 54 mm)2.2 mm1,166 mm15Vinyl, card and thin sheet
4 × 2.83 in (102 × 72 mm)2.9 mm1,554 mm8Vinyl, card and thin sheet
6 × 4.24 in (152 × 108 mm)4.4 mm2,332 mm2Any material, including 3 mm wood and acrylic
8 × 5.66 in (203 × 144 mm)5.9 mm3,109 mm2Any material, including 3 mm wood and acrylic
12 × 8.48 in (305 × 215 mm)8.8 mm4,663 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Sunshine SVG files

← Hello Sunshine in Amatic SC All 12 Hello Sunshine designs Hello Sunshine in script and capitals →