Free Hello Sunshine SVG

Hello Sunshine with a drop shadow SVG

Hello Sunshine with a drop shadow, in layered colours
Hello Sunshine with a drop shadow. The preview is the SVG file itself.

“Hello Sunshine” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 70 mm (3.94 × 2.76 in), scales to any size
Pieces7 separate pieces
Outlines to cut19: 7 outer edges and 12 cut-outs
Cut length1,704 mm at this size
Narrowest part2.9 mm at this size
Nodes640 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,425 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.74 mm433 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.4 in (51 × 36 mm)1.5 mm866 mm35Vinyl, card and thin sheet
3 × 2.1 in (76 × 53 mm)2.2 mm1,298 mm15Vinyl, card and thin sheet
4 × 2.8 in (102 × 71 mm)2.9 mm1,731 mm8Vinyl, card and thin sheet
6 × 4.21 in (152 × 107 mm)4.4 mm2,597 mm2Any material, including 3 mm wood and acrylic
8 × 5.61 in (203 × 142 mm)5.9 mm3,463 mm2Any material, including 3 mm wood and acrylic
12 × 8.41 in (305 × 214 mm)8.8 mm5,194 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Sunshine SVG files

← Hello Sunshine stencil plate All 12 Hello Sunshine designs Hello Sunshine in Pacifico →