Free Hello Spring SVG

Hello Spring in Alfa Slab One SVG

Hello Spring in Alfa Slab One, as a solid black shape
Hello Spring in Alfa Slab One. The preview is the SVG file itself.

“Hello Spring” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.47 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length979 mm at this size
Narrowest part3 mm at this size
Nodes392 curve and line segments

Measured from the file. PNG: 2,000 × 1,285 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.76 mm249 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.26 in (51 × 32 mm)1.5 mm497 mm40Vinyl, card and thin sheet
3 × 1.88 in (76 × 48 mm)2.3 mm746 mm15Vinyl, card and thin sheet
4 × 2.51 in (102 × 64 mm)3 mm995 mm8Any material, including 3 mm wood and acrylic
6 × 3.77 in (152 × 96 mm)4.6 mm1,492 mm3Any material, including 3 mm wood and acrylic
8 × 5.02 in (203 × 128 mm)6.1 mm1,989 mm2Any material, including 3 mm wood and acrylic
12 × 7.54 in (305 × 191 mm)9.1 mm2,984 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Spring SVG files

← Hello Spring in Lilita One All 12 Hello Spring designs Hello Spring in Amatic SC →