Free Hello Spring SVG

Hello Spring stencil plate SVG

Hello Spring stencil plate, as a solid black shape — Hello Spring stencil plate. The preview is the SVG file itself.

A rounded plate with “HELLO SPRING” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,412 mm at this size
Narrowest part	1.7 mm at this size
Nodes	163 curve and line segments

Measured from the file. PNG: 2,000 × 1,512 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.43 mm	359 mm	120	Too fine for most machines
2 × 1.49 in (51 × 38 mm)	0.86 mm	717 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)	1.3 mm	1,076 mm	15	Vinyl, card and thin sheet
4 × 2.98 in (102 × 76 mm)	1.7 mm	1,435 mm	6	Vinyl, card and thin sheet
6 × 4.48 in (152 × 114 mm)	2.6 mm	2,152 mm	2	Vinyl, card and thin sheet
8 × 5.97 in (203 × 152 mm)	3.5 mm	2,869 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.95 in (305 × 227 mm)	5.2 mm	4,304 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Spring SVG files

← Hello Spring outline lettering All 12 Hello Spring designs Hello Spring with a drop shadow →