Free Hello Spring SVG

Hello Spring with a drop shadow SVG

Hello Spring with a drop shadow, in layered colours
Hello Spring with a drop shadow. The preview is the SVG file itself.

“Hello Spring” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size96 × 100 mm (3.76 × 3.94 in), scales to any size
Pieces7 separate pieces
Outlines to cut26: 7 outer edges and 19 cut-outs
Cut length2,056 mm at this size
Narrowest part2.1 mm at this size
Nodes678 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 1,915 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.53 mm522 mm100Fine detail: vinyl and paper only, weed with care
1.91 × 2 in (49 × 51 mm)1.1 mm1,044 mm25Vinyl, card and thin sheet
2.87 × 3 in (73 × 76 mm)1.6 mm1,567 mm9Vinyl, card and thin sheet
3.82 × 4 in (97 × 102 mm)2.1 mm2,089 mm6Vinyl, card and thin sheet
5.74 × 6 in (146 × 152 mm)3.2 mm3,133 mm2Any material, including 3 mm wood and acrylic
7.65 × 8 in (194 × 203 mm)4.3 mm4,178 mm1Any material, including 3 mm wood and acrylic
11.47 × 12 in (291 × 305 mm)6.4 mm6,267 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Spring SVG files

← Hello Spring stencil plate All 12 Hello Spring designs Hello Spring in Pacifico →