Free Hello Spring SVG

Hello Spring in block capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Spring in block capitals, as a solid black shape
Hello Spring in block capitals. The preview is the SVG file itself.

“HELLO SPRING” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
Pieces11 separate pieces
Outlines to cut14: 11 outer edges and 3 cut-outs
Cut length1,524 mm at this size
Narrowest part3.9 mm at this size
Nodes158 curve and line segments

Measured from the file. PNG: 2,000 × 1,617 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)0.99 mm387 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.6 in (51 × 41 mm)2 mm774 mm30Vinyl, card and thin sheet
3 × 2.4 in (76 × 61 mm)3 mm1,161 mm12Vinyl, card and thin sheet
4 × 3.2 in (102 × 81 mm)4 mm1,548 mm6Any material, including 3 mm wood and acrylic
6 × 4.81 in (152 × 122 mm)5.9 mm2,323 mm2Any material, including 3 mm wood and acrylic
8 × 6.41 in (203 × 163 mm)7.9 mm3,097 mm1Any material, including 3 mm wood and acrylic
12 × 9.61 in (305 × 244 mm)12 mm4,645 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Spring SVG files

← Hello Spring in Amatic SC All 13 Hello Spring designs Hello Spring in script and capitals →