Free Hello Spring SVG

Hello Spring in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Spring in Amatic SC, as a solid black shape
Hello Spring in Amatic SC. The preview is the SVG file itself.

“Hello Spring” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size95 × 100 mm (3.72 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut14: 11 outer edges and 3 cut-outs
Cut length1,451 mm at this size
Narrowest part1.6 mm at this size
Nodes389 curve and line segments

Measured from the file. PNG: 1,894 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.41 mm369 mm100Too fine for most machines
1.89 × 2 in (48 × 51 mm)0.81 mm737 mm25Fine detail: vinyl and paper only, weed with care
2.83 × 3 in (72 × 76 mm)1.2 mm1,106 mm12Vinyl, card and thin sheet
3.78 × 4 in (96 × 102 mm)1.6 mm1,474 mm6Vinyl, card and thin sheet
5.67 × 6 in (144 × 152 mm)2.4 mm2,211 mm2Vinyl, card and thin sheet
7.56 × 8 in (192 × 203 mm)3.3 mm2,948 mm1Any material, including 3 mm wood and acrylic
11.34 × 12 in (288 × 305 mm)4.9 mm4,423 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Spring SVG files

← Hello Spring in Alfa Slab One All 13 Hello Spring designs Hello Spring in block capitals →