Free Hello Spring SVG

Hello Spring in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Spring in Lilita One, as a solid black shape
Hello Spring in Lilita One. The preview is the SVG file itself.

“Hello Spring” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 72 mm (3.94 × 2.84 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length940 mm at this size
Narrowest part4 mm at this size
Nodes214 curve and line segments

Measured from the file. PNG: 2,000 × 1,463 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)1 mm239 mm130Vinyl, card and thin sheet
2 × 1.44 in (51 × 37 mm)2 mm478 mm35Vinyl, card and thin sheet
3 × 2.16 in (76 × 55 mm)3 mm716 mm15Any material, including 3 mm wood and acrylic
4 × 2.88 in (102 × 73 mm)4.1 mm955 mm6Any material, including 3 mm wood and acrylic
6 × 4.33 in (152 × 110 mm)6.1 mm1,433 mm2Any material, including 3 mm wood and acrylic
8 × 5.77 in (203 × 147 mm)8.1 mm1,910 mm2Any material, including 3 mm wood and acrylic
12 × 8.65 in (305 × 220 mm)12 mm2,865 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Spring SVG files

← Hello Spring in Kaushan Script All 13 Hello Spring designs Hello Spring in Alfa Slab One →