Happy Halloween stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “HAPPY HALLOWEEN” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 63 mm (3.94 × 2.48 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 15: 1 outer edge and 14 cut-outs |
| Cut length | 1,323 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 316 curve and line segments |
Measured from the file. PNG: 2,000 × 1,287 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.63 in (25 × 16 mm) | 0.41 mm | 336 mm | 140 | Too fine for most machines |
| 2 × 1.26 in (51 × 32 mm) | 0.81 mm | 672 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.89 in (76 × 48 mm) | 1.2 mm | 1,008 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.52 in (102 × 64 mm) | 1.6 mm | 1,344 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.77 in (152 × 96 mm) | 2.4 mm | 2,016 mm | 3 | Vinyl, card and thin sheet |
| 8 × 5.03 in (203 × 128 mm) | 3.3 mm | 2,688 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.55 in (305 × 192 mm) | 4.9 mm | 4,033 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Halloween SVG files
-
Happy Halloween with a drop shadow Layered · 4 pieces
-
Happy Halloween with a jack-o’-lantern Solid · 11 pieces
-
Happy Halloween in Pacifico Solid · 2 pieces
-
Happy Halloween in Lobster Solid · 7 pieces
-
Happy Halloween in Kaushan Script Solid · 14 pieces
-
Happy Halloween in Lilita One Solid · 14 pieces
-
Happy Halloween in Alfa Slab One Solid · 14 pieces
-
Happy Halloween in Amatic SC Solid · 14 pieces
← Happy Halloween outline lettering All 14 Happy Halloween designs Happy Halloween with a drop shadow →