Happy Halloween with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy Halloween” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 57 mm (3.94 × 2.24 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 21: 4 outer edges and 17 cut-outs |
| Cut length | 1,619 mm at this size |
| Narrowest part | 4.9 mm at this size |
| Nodes | 529 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,171 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.57 in (25 × 14 mm) | 1.2 mm | 411 mm | 150 | Vinyl, card and thin sheet |
| 2 × 1.14 in (51 × 29 mm) | 2.5 mm | 822 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.71 in (76 × 43 mm) | 3.7 mm | 1,234 mm | 18 | Any material, including 3 mm wood and acrylic |
| 4 × 2.28 in (102 × 58 mm) | 5 mm | 1,645 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.41 in (152 × 87 mm) | 7.5 mm | 2,467 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.55 in (203 × 116 mm) | 10 mm | 3,290 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.83 in (305 × 173 mm) | 15 mm | 4,935 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Halloween SVG files
-
Happy Halloween with a jack-o’-lantern Solid · 11 pieces
-
Happy Halloween in Pacifico Solid · 2 pieces
-
Happy Halloween in Lobster Solid · 7 pieces
-
Happy Halloween in Kaushan Script Solid · 14 pieces
-
Happy Halloween in Lilita One Solid · 14 pieces
-
Happy Halloween in Alfa Slab One Solid · 14 pieces
-
Happy Halloween in Amatic SC Solid · 14 pieces
-
Happy Halloween in block capitals Solid · 14 pieces
← Happy Halloween stencil plate All 14 Happy Halloween designs Happy Halloween with a jack-o’-lantern →