Free Happy Halloween SVG

Happy Halloween in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Halloween in Pacifico, as a solid black shape
Happy Halloween in Pacifico. The preview is the SVG file itself.

“Happy Halloween” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 56 mm (3.94 × 2.19 in), scales to any size
Pieces2 separate pieces
Outlines to cut16: 2 outer edges and 14 cut-outs
Cut length1,046 mm at this size
Narrowest part1.4 mm at this size
Nodes366 curve and line segments

Measured from the file. PNG: 2,000 × 1,146 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.36 mm266 mm160Too fine for most machines
2 × 1.11 in (51 × 28 mm)0.71 mm531 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.67 in (76 × 42 mm)1.1 mm797 mm18Vinyl, card and thin sheet
4 × 2.22 in (102 × 56 mm)1.4 mm1,063 mm10Vinyl, card and thin sheet
6 × 3.34 in (152 × 85 mm)2.1 mm1,594 mm3Vinyl, card and thin sheet
8 × 4.45 in (203 × 113 mm)2.8 mm2,125 mm2Vinyl, card and thin sheet
12 × 6.67 in (305 × 169 mm)4.3 mm3,188 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Halloween SVG files

← Happy Halloween with a jack-o’-lantern All 14 Happy Halloween designs Happy Halloween in Lobster →