Free Happy Halloween SVG

Happy Halloween in script and capitals SVG

Happy Halloween in script and capitals, as a solid black shape — Happy Halloween in script and capitals. The preview is the SVG file itself.

“Happy” in Pacifico script over “HALLOWEEN” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.88 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	19: 10 outer edges and 9 cut-outs
Cut length	1,495 mm at this size
Narrowest part	2 mm at this size
Nodes	285 curve and line segments

Measured from the file. PNG: 2,000 × 1,485 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 19 mm)	0.51 mm	380 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.46 in (51 × 37 mm)	1 mm	759 mm	35	Vinyl, card and thin sheet
3 × 2.2 in (76 × 56 mm)	1.5 mm	1,139 mm	15	Vinyl, card and thin sheet
4 × 2.93 in (102 × 74 mm)	2 mm	1,519 mm	6	Vinyl, card and thin sheet
6 × 4.39 in (152 × 112 mm)	3 mm	2,278 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.86 in (203 × 149 mm)	4.1 mm	3,038 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.78 in (305 × 223 mm)	6.1 mm	4,557 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Halloween SVG files

← Happy Halloween in block capitals All 13 Happy Halloween designs Happy Halloween in Creepster →