Free Happy Halloween SVG

Happy Halloween with stars SVG

Happy Halloween with stars, as a solid black shape — Happy Halloween with stars. The preview is the SVG file itself.

“Happy Halloween” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.35 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	21: 13 outer edges and 8 cut-outs
Cut length	1,261 mm at this size
Narrowest part	1 mm at this size
Nodes	494 curve and line segments

Measured from the file. PNG: 2,000 × 1,712 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 22 mm)	0.25 mm	320 mm	110	Too fine for most machines
2 × 1.7 in (51 × 43 mm)	0.51 mm	641 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.55 in (76 × 65 mm)	0.76 mm	961 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.4 in (102 × 86 mm)	1 mm	1,281 mm	6	Vinyl, card and thin sheet
6 × 5.1 in (152 × 130 mm)	1.5 mm	1,922 mm	2	Vinyl, card and thin sheet
8 × 6.8 in (203 × 173 mm)	2 mm	2,562 mm	1	Vinyl, card and thin sheet
12 × 10.2 in (305 × 259 mm)	3 mm	3,844 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Halloween SVG files

← Happy Halloween in Creepster All 13 Happy Halloween designs Happy Halloween outline lettering →