Happy Halloween in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy Halloween” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.61 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 21: 14 outer edges and 7 cut-outs |
| Cut length | 809 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 246 curve and line segments |
Measured from the file. PNG: 2,000 × 862 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.61 mm | 205 mm | 200 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.82 in (51 × 21 mm) | 1.2 mm | 411 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.22 in (76 × 31 mm) | 1.8 mm | 616 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.63 in (102 × 41 mm) | 2.4 mm | 822 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.45 in (152 × 62 mm) | 3.7 mm | 1,233 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.26 in (203 × 83 mm) | 4.9 mm | 1,644 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.9 in (305 × 124 mm) | 7.3 mm | 2,466 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Halloween SVG files
-
Happy Halloween in Alfa Slab One Solid · 14 pieces
-
Happy Halloween in Amatic SC Solid · 14 pieces
-
Happy Halloween in block capitals Solid · 14 pieces
-
Happy Halloween in script and capitals Solid · 10 pieces
-
Happy Halloween in Creepster Solid · 14 pieces
-
Happy Halloween with stars Solid · 13 pieces
-
Happy Halloween outline lettering Outline · 17 pieces
-
Happy Halloween stencil plate Solid · one piece
← Happy Halloween in Kaushan Script All 14 Happy Halloween designs Happy Halloween in Alfa Slab One →