Happy Halloween in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy Halloween” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.41 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 21: 14 outer edges and 7 cut-outs |
| Cut length | 849 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 290 curve and line segments |
Measured from the file. PNG: 2,000 × 763 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | 0.46 mm | 216 mm | 210 | Too fine for most machines |
| 2 × 0.71 in (51 × 18 mm) | 0.91 mm | 431 mm | 65 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.07 in (76 × 27 mm) | 1.4 mm | 647 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.43 in (102 × 36 mm) | 1.8 mm | 863 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.14 in (152 × 54 mm) | 2.7 mm | 1,294 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.86 in (203 × 73 mm) | 3.7 mm | 1,725 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.28 in (305 × 109 mm) | 5.5 mm | 2,588 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Halloween SVG files
-
Happy Halloween in Amatic SC Solid · 14 pieces
-
Happy Halloween in block capitals Solid · 14 pieces
-
Happy Halloween in script and capitals Solid · 10 pieces
-
Happy Halloween in Creepster Solid · 14 pieces
-
Happy Halloween with stars Solid · 13 pieces
-
Happy Halloween outline lettering Outline · 17 pieces
-
Happy Halloween stencil plate Solid · one piece
-
Happy Halloween with a drop shadow Layered · 4 pieces
← Happy Halloween in Lilita One All 14 Happy Halloween designs Happy Halloween in Amatic SC →