Free Happy Halloween SVG

Happy Halloween in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Halloween in Lobster, as a solid black shape
Happy Halloween in Lobster. The preview is the SVG file itself.

“Happy Halloween” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 53 mm (3.94 × 2.08 in), scales to any size
Pieces7 separate pieces
Outlines to cut15: 7 outer edges and 8 cut-outs
Cut length1,032 mm at this size
Narrowest part1 mm at this size
Nodes263 curve and line segments

Measured from the file. PNG: 2,000 × 1,092 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.25 mm262 mm160Too fine for most machines
2 × 1.06 in (51 × 27 mm)0.51 mm524 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.58 in (76 × 40 mm)0.76 mm786 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.11 in (102 × 54 mm)1 mm1,049 mm10Vinyl, card and thin sheet
6 × 3.17 in (152 × 80 mm)1.5 mm1,573 mm3Vinyl, card and thin sheet
8 × 4.22 in (203 × 107 mm)2 mm2,097 mm2Vinyl, card and thin sheet
12 × 6.34 in (305 × 161 mm)3 mm3,146 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Halloween SVG files

← Happy Halloween in Pacifico All 14 Happy Halloween designs Happy Halloween in Kaushan Script →