Growth chart inch marks for one foot SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
One foot of loose marks in two strips of seven. The left strip runs from 3 inches below a foot line to 3 above it, the right from there to 3 below the next. Cut the file 168 mm wide and the marks are 25.4 mm (1 inch) apart. Each strip ends on the mark the next begins with.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.65 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 14 outlines |
| Cut length | 812 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 112 curve and line segments |
| Also found as | Measuring board growth chart SVG |
Measured from the file. PNG: 2,000 × 1,858 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.51 mm | 206 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.85 in (51 × 47 mm) | 1 mm | 412 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.78 in (76 × 71 mm) | 1.5 mm | 619 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.7 in (102 × 94 mm) | 2 mm | 825 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.56 in (152 × 141 mm) | 3 mm | 1,237 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.41 in (203 × 188 mm) | 4.1 mm | 1,650 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.11 in (305 × 282 mm) | 6.1 mm | 2,475 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More growth chart SVG files
-
Growth chart marks with round ends Solid · 14 pieces -
Growth chart numerals 1 to 6 in a slab face Solid · 6 pieces -
Growth chart numerals 1 to 6, tall and narrow Solid · 6 pieces -
Growth chart stencil for six inches of marks Solid · one piece -
Growth chart stencil for the numerals 1 to 6 Solid · one piece -
Growth chart marks for 20 centimetres Solid · 21 pieces -
Growth chart numerals from 10 to 200 cm Solid · 51 pieces -
Growth chart stencil for 20 centimetres Solid · one piece
← Layered growth chart board with a round top All 11 growth charts Growth chart marks with round ends →