Growth chart marks for 20 centimetres SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Twenty centimetres of loose marks: long at each ten, medium at each five, short between, 21 in all, beginning and ending on a five. Cut the file 203 mm tall and the marks are exactly 10 mm apart. Lay the first mark of each section on the last mark of the one below.
What is in the file
| Size | 35 × 100 mm (1.36 × 3.94 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 21 outlines |
| Cut length | 808 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 168 curve and line segments |
| Also found as | Height chart SVG |
Measured from the file. PNG: 740 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.35 × 1 in (9 × 25 mm) | 0.38 mm | 205 mm | 220 | Too fine for most machines |
| 0.69 × 2 in (18 × 51 mm) | 0.76 mm | 410 mm | 65 | Fine detail: vinyl and paper only, weed with care |
| 1.03 × 3 in (26 × 76 mm) | 1.1 mm | 616 mm | 27 | Vinyl, card and thin sheet |
| 1.38 × 4 in (35 × 102 mm) | 1.5 mm | 821 mm | 14 | Vinyl, card and thin sheet |
| 2.07 × 6 in (53 × 152 mm) | 2.3 mm | 1,231 mm | 5 | Vinyl, card and thin sheet |
| 2.76 × 8 in (70 × 203 mm) | 3 mm | 1,642 mm | 4 | Any material, including 3 mm wood and acrylic |
| 4.14 × 12 in (105 × 305 mm) | 4.6 mm | 2,463 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More growth chart SVG files
-
Growth chart numerals from 10 to 200 cm Solid · 51 pieces -
Growth chart stencil for 20 centimetres Solid · one piece -
Growth chart marker flags Solid · 8 pieces -
Layered growth chart board with a round top Layered · 13 pieces -
Growth chart inch marks for one foot Solid · 14 pieces -
Growth chart marks with round ends Solid · 14 pieces -
Growth chart numerals 1 to 6 in a slab face Solid · 6 pieces -
Growth chart numerals 1 to 6, tall and narrow Solid · 6 pieces
← Growth chart stencil for the numerals 1 to 6 All 11 growth charts Growth chart numerals from 10 to 200 cm →