Growth chart numerals from 10 to 200 cm SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The tens from 10 to 200 as loose numerals in a slab face, four to a row, to set beside the long marks of the centimetre sections. Cut the file 288 mm wide and they are 26 mm tall. Use only the ones your board reaches.
What is in the file
| Size | 100 × 64 mm (3.94 × 2.5 in), scales to any size |
|---|---|
| Pieces | 51 separate pieces |
| Outlines to cut | 83: 51 outer edges and 32 cut-outs |
| Cut length | 1,971 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 650 curve and line segments |
Measured from the file. PNG: 2,000 × 1,300 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.64 in (25 × 16 mm) | 0.38 mm | 501 mm | 140 | Too fine for most machines |
| 2 × 1.27 in (51 × 32 mm) | 0.76 mm | 1,001 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.91 in (76 × 48 mm) | 1.1 mm | 1,502 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.54 in (102 × 65 mm) | 1.5 mm | 2,003 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.82 in (152 × 97 mm) | 2.3 mm | 3,004 mm | 3 | Vinyl, card and thin sheet |
| 8 × 5.09 in (203 × 129 mm) | 3 mm | 4,005 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.63 in (305 × 194 mm) | 4.6 mm | 6,008 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More growth chart SVG files
-
Growth chart stencil for 20 centimetres Solid · one piece -
Growth chart marker flags Solid · 8 pieces -
Layered growth chart board with a round top Layered · 13 pieces -
Growth chart inch marks for one foot Solid · 14 pieces -
Growth chart marks with round ends Solid · 14 pieces -
Growth chart numerals 1 to 6 in a slab face Solid · 6 pieces -
Growth chart numerals 1 to 6, tall and narrow Solid · 6 pieces -
Growth chart stencil for six inches of marks Solid · one piece
← Growth chart marks for 20 centimetres All 11 growth charts Growth chart stencil for 20 centimetres →