Growth chart stencil for 20 centimetres SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A comb-shaped paint stencil in one piece. Cut it 200 mm tall and its twenty notches are exactly 10 mm apart: long for the tens, medium for the fives, short between. The first notch is 5 mm above the foot of the plate, so plates butted end to end keep the spacing.
What is in the file
| Size | 52 × 100 mm (2.05 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 1,020 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 84 curve and line segments |
Measured from the file. PNG: 1,077 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.52 × 1 in (13 × 25 mm) | Over 1.5 mm | 259 mm | 160 | Vinyl, card and thin sheet |
| 1.04 × 2 in (26 × 51 mm) | Over 3 mm | 518 mm | 45 | Any material, including 3 mm wood and acrylic |
| 1.56 × 3 in (40 × 76 mm) | Over 4.6 mm | 777 mm | 18 | Any material, including 3 mm wood and acrylic |
| 2.08 × 4 in (53 × 102 mm) | Over 6.1 mm | 1,036 mm | 10 | Any material, including 3 mm wood and acrylic |
| 3.12 × 6 in (79 × 152 mm) | Over 9.1 mm | 1,554 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.16 × 8 in (106 × 203 mm) | Over 12 mm | 2,073 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.24 × 12 in (158 × 305 mm) | Over 18 mm | 3,109 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More growth chart SVG files
-
Growth chart marker flags Solid · 8 pieces -
Layered growth chart board with a round top Layered · 13 pieces -
Growth chart inch marks for one foot Solid · 14 pieces -
Growth chart marks with round ends Solid · 14 pieces -
Growth chart numerals 1 to 6 in a slab face Solid · 6 pieces -
Growth chart numerals 1 to 6, tall and narrow Solid · 6 pieces -
Growth chart stencil for six inches of marks Solid · one piece -
Growth chart stencil for the numerals 1 to 6 Solid · one piece
← Growth chart numerals from 10 to 200 cm All 11 growth charts Growth chart marker flags →