God Bless America stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “GOD BLESS AMERICA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.26 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 1,341 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 368 curve and line segments |
Measured from the file. PNG: 2,000 × 1,183 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.25 mm | 341 mm | 150 | Too fine for most machines |
| 2 × 1.15 in (51 × 29 mm) | 0.51 mm | 681 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.73 in (76 × 44 mm) | 0.76 mm | 1,022 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.3 in (102 × 58 mm) | 1 mm | 1,362 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.45 in (152 × 88 mm) | 1.5 mm | 2,044 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.6 in (203 × 117 mm) | 2 mm | 2,725 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.9 in (305 × 175 mm) | 3 mm | 4,087 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More God Bless America SVG files
-
God Bless America with a drop shadow Layered · 8 pieces -
God Bless America in Pacifico Solid · 5 pieces -
God Bless America in Lobster Solid · 8 pieces -
God Bless America in Kaushan Script Solid · 16 pieces -
God Bless America in Lilita One Solid · 16 pieces -
God Bless America in Alfa Slab One Solid · 16 pieces -
God Bless America in Amatic SC Solid · 15 pieces -
God Bless America in block capitals Solid · 15 pieces
← God Bless America outline lettering All 12 God Bless America designs God Bless America with a drop shadow →