Free God Bless America SVG

God Bless America in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

God Bless America in Lilita One, as a solid black shape
God Bless America in Lilita One. The preview is the SVG file itself.

“God Bless America” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 44 mm (3.94 × 1.74 in), scales to any size
Pieces16 separate pieces
Outlines to cut24: 16 outer edges and 8 cut-outs
Cut length887 mm at this size
Narrowest part2.5 mm at this size
Nodes298 curve and line segments

Measured from the file. PNG: 2,000 × 927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.64 mm225 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.88 in (51 × 22 mm)1.3 mm451 mm55Vinyl, card and thin sheet
3 × 1.33 in (76 × 34 mm)1.9 mm676 mm21Vinyl, card and thin sheet
4 × 1.77 in (102 × 45 mm)2.5 mm901 mm12Vinyl, card and thin sheet
6 × 2.65 in (152 × 67 mm)3.8 mm1,352 mm4Any material, including 3 mm wood and acrylic
8 × 3.54 in (203 × 90 mm)5.1 mm1,802 mm3Any material, including 3 mm wood and acrylic
12 × 5.3 in (305 × 135 mm)7.6 mm2,704 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless America SVG files

← God Bless America in Kaushan Script All 13 God Bless America designs God Bless America in Alfa Slab One →