Free God Bless America SVG

God Bless America in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

God Bless America in Kaushan Script, as a solid black shape
God Bless America in Kaushan Script. The preview is the SVG file itself.

“God Bless America” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 55 mm (3.94 × 2.16 in), scales to any size
Pieces16 separate pieces
Outlines to cut25: 16 outer edges and 9 cut-outs
Cut length1,165 mm at this size
Narrowest part0.8 mm at this size
Nodes454 curve and line segments

Measured from the file. PNG: 2,000 × 1,133 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.2 mm296 mm160Too fine for most machines
2 × 1.1 in (51 × 28 mm)0.41 mm592 mm45Too fine for most machines
3 × 1.65 in (76 × 42 mm)0.61 mm888 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.2 in (102 × 56 mm)0.81 mm1,184 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.29 in (152 × 84 mm)1.2 mm1,775 mm3Vinyl, card and thin sheet
8 × 4.39 in (203 × 112 mm)1.6 mm2,367 mm2Vinyl, card and thin sheet
12 × 6.59 in (305 × 167 mm)2.4 mm3,551 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless America SVG files

← God Bless America in Lobster All 13 God Bless America designs God Bless America in Lilita One →