Free God Bless America SVG

God Bless America in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

God Bless America in Lobster, as a solid black shape
God Bless America in Lobster. The preview is the SVG file itself.

“God Bless America” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 60 mm (3.94 × 2.35 in), scales to any size
Pieces8 separate pieces
Outlines to cut16: 8 outer edges and 8 cut-outs
Cut length1,154 mm at this size
Narrowest part1 mm at this size
Nodes318 curve and line segments

Measured from the file. PNG: 2,000 × 1,227 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.25 mm293 mm150Too fine for most machines
2 × 1.2 in (51 × 30 mm)0.51 mm586 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.79 in (76 × 46 mm)0.76 mm879 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.39 in (102 × 61 mm)1 mm1,172 mm8Vinyl, card and thin sheet
6 × 3.59 in (152 × 91 mm)1.5 mm1,759 mm3Vinyl, card and thin sheet
8 × 4.78 in (203 × 122 mm)2 mm2,345 mm2Vinyl, card and thin sheet
12 × 7.18 in (305 × 182 mm)3 mm3,517 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless America SVG files

← God Bless America in Pacifico All 13 God Bless America designs God Bless America in Kaushan Script →