Free God Bless America SVG

God Bless America outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

God Bless America outline lettering, drawn as a line
God Bless America outline lettering. The preview is the SVG file itself.

“God Bless America” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 42 mm (3.94 × 1.65 in), scales to any size
Pieces17 separate pieces
Outlines to cut50: 17 outer edges and 33 cut-outs
Cut length1,385 mm at this size
Narrowest part0.7 mm at this size
Nodes570 curve and line segments

Measured from the file. PNG: 2,000 × 881 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.42 in (25 × 11 mm)0.18 mm352 mm190Too fine for most machines
2 × 0.84 in (51 × 21 mm)0.36 mm704 mm55Too fine for most machines
3 × 1.25 in (76 × 32 mm)0.53 mm1,055 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.67 in (102 × 42 mm)0.71 mm1,407 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.51 in (152 × 64 mm)1.1 mm2,111 mm4Vinyl, card and thin sheet
8 × 3.34 in (203 × 85 mm)1.4 mm2,814 mm3Vinyl, card and thin sheet
12 × 5.02 in (305 × 127 mm)2.1 mm4,221 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless America SVG files

← God Bless America with stars All 13 God Bless America designs God Bless America stencil plate →