Free God Bless America SVG

God Bless America in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

God Bless America in Pacifico, as a solid black shape
God Bless America in Pacifico. The preview is the SVG file itself.

“God Bless America” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 58 mm (3.94 × 2.28 in), scales to any size
Pieces5 separate pieces
Outlines to cut13: 5 outer edges and 8 cut-outs
Cut length1,046 mm at this size
Narrowest part1.4 mm at this size
Nodes390 curve and line segments

Measured from the file. PNG: 2,000 × 1,190 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.36 mm266 mm150Too fine for most machines
2 × 1.16 in (51 × 29 mm)0.71 mm531 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.74 in (76 × 44 mm)1.1 mm797 mm18Vinyl, card and thin sheet
4 × 2.32 in (102 × 59 mm)1.4 mm1,063 mm8Vinyl, card and thin sheet
6 × 3.47 in (152 × 88 mm)2.1 mm1,594 mm3Vinyl, card and thin sheet
8 × 4.63 in (203 × 118 mm)2.8 mm2,125 mm2Vinyl, card and thin sheet
12 × 6.95 in (305 × 176 mm)4.3 mm3,188 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless America SVG files

← God Bless America with a waving flag All 13 God Bless America designs God Bless America in Lobster →