Give It to God with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give It to God and Go to Sleep” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.67 in), scales to any size |
|---|---|
| Pieces | 19 separate pieces |
| Outlines to cut | 49: 19 outer edges and 30 cut-outs |
| Cut length | 2,557 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 1,082 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,871 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.61 mm | 649 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.87 in (51 × 47 mm) | 1.2 mm | 1,299 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.8 in (76 × 71 mm) | 1.8 mm | 1,948 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.73 in (102 × 95 mm) | 2.4 mm | 2,598 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.6 in (152 × 142 mm) | 3.7 mm | 3,897 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.46 in (203 × 190 mm) | 4.9 mm | 5,196 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.2 in (305 × 284 mm) | 7.3 mm | 7,794 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give It to God and Go to Sleep SVG files
-
Give It to God in Pacifico Solid · 11 pieces -
Give It to God in Lobster Solid · 15 pieces -
Give It to God in Kaushan Script Solid · 24 pieces -
Give It to God in Lilita One Solid · 24 pieces -
Give It to God in Alfa Slab One Solid · 22 pieces -
Give It to God in Amatic SC Solid · 23 pieces -
Give It to God in block capitals Solid · 23 pieces -
Give It to God in script and capitals Solid · 21 pieces
← Give It to God stencil plate All 12 Give It to God and Go to Sleep designs Give It to God in Pacifico →