Give It to God in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give It to God and Go to Sleep” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.92 in), scales to any size |
|---|---|
| Pieces | 23 separate pieces |
| Outlines to cut | 31: 23 outer edges and 8 cut-outs |
| Cut length | 1,887 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 639 curve and line segments |
Measured from the file. PNG: 2,000 × 1,990 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.38 mm | 479 mm | 100 | Too fine for most machines |
| 2 × 1.99 in (51 × 51 mm) | 0.76 mm | 959 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.99 in (76 × 76 mm) | 1.1 mm | 1,438 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.98 in (102 × 101 mm) | 1.5 mm | 1,917 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.97 in (152 × 152 mm) | 2.3 mm | 2,876 mm | 1 | Vinyl, card and thin sheet |
| 8 × 7.96 in (203 × 202 mm) | 3 mm | 3,834 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.94 in (305 × 303 mm) | 4.6 mm | 5,752 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give It to God and Go to Sleep SVG files
-
Give It to God in block capitals Solid · 23 pieces
-
Give It to God in script and capitals Solid · 21 pieces
-
Give It to God with hearts Solid · 21 pieces
-
Give It to God outline lettering Outline · 24 pieces
-
Give It to God stencil plate Solid · one piece
-
Give It to God with a drop shadow Layered · 19 pieces
-
Give It to God with a cross Solid · 22 pieces
-
Give It to God in Pacifico Solid · 11 pieces
← Give It to God in Alfa Slab One All 13 Give It to God and Go to Sleep designs Give It to God in block capitals →