Give It to God in block capitals SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“GIVE IT TO GOD AND GO TO SLEEP” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.48 in), scales to any size |
|---|---|
| Pieces | 23 separate pieces |
| Outlines to cut | 31: 23 outer edges and 8 cut-outs |
| Cut length | 2,057 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 294 curve and line segments |
Measured from the file. PNG: 2,000 × 1,779 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 22 mm) | 0.61 mm | 522 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.77 in (51 × 45 mm) | 1.2 mm | 1,045 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.66 in (76 × 67 mm) | 1.8 mm | 1,567 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.54 in (102 × 90 mm) | 2.4 mm | 2,090 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.31 in (152 × 135 mm) | 3.7 mm | 3,135 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.08 in (203 × 180 mm) | 4.9 mm | 4,180 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.62 in (305 × 270 mm) | 7.3 mm | 6,270 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give It to God and Go to Sleep SVG files
-
Give It to God in script and capitals Solid · 21 pieces -
Give It to God with hearts Solid · 21 pieces -
Give It to God outline lettering Outline · 28 pieces -
Give It to God stencil plate Solid · one piece -
Give It to God with a drop shadow Layered · 19 pieces -
Give It to God in Pacifico Solid · 11 pieces -
Give It to God in Lobster Solid · 15 pieces -
Give It to God in Kaushan Script Solid · 24 pieces
← Give It to God in Amatic SC All 12 Give It to God and Go to Sleep designs Give It to God in script and capitals →