Give It to God stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “GIVE IT TO GOD AND GO TO SLEEP” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.16 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 24: 1 outer edge and 23 cut-outs |
| Cut length | 1,681 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 422 curve and line segments |
Measured from the file. PNG: 2,000 × 1,621 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.28 mm | 427 mm | 120 | Too fine for most machines |
| 2 × 1.61 in (51 × 41 mm) | 0.56 mm | 854 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.41 in (76 × 61 mm) | 0.84 mm | 1,281 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.21 in (102 × 82 mm) | 1.1 mm | 1,708 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.82 in (152 × 122 mm) | 1.7 mm | 2,562 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.42 in (203 × 163 mm) | 2.2 mm | 3,416 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.64 in (305 × 245 mm) | 3.4 mm | 5,124 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give It to God and Go to Sleep SVG files
-
Give It to God with a drop shadow Layered · 19 pieces -
Give It to God in Pacifico Solid · 11 pieces -
Give It to God in Lobster Solid · 15 pieces -
Give It to God in Kaushan Script Solid · 24 pieces -
Give It to God in Lilita One Solid · 24 pieces -
Give It to God in Alfa Slab One Solid · 22 pieces -
Give It to God in Amatic SC Solid · 23 pieces -
Give It to God in block capitals Solid · 23 pieces
← Give It to God outline lettering All 12 Give It to God and Go to Sleep designs Give It to God with a drop shadow →