Give It to God in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give It to God and Go to Sleep” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.59 in), scales to any size |
|---|---|
| Pieces | 24 separate pieces |
| Outlines to cut | 35: 24 outer edges and 11 cut-outs |
| Cut length | 1,155 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 379 curve and line segments |
Measured from the file. PNG: 2,000 × 1,342 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.56 mm | 293 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.32 in (51 × 33 mm) | 1.1 mm | 587 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.97 in (76 × 50 mm) | 1.7 mm | 880 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.63 in (102 × 67 mm) | 2.2 mm | 1,173 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.95 in (152 × 100 mm) | 3.4 mm | 1,760 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.26 in (203 × 134 mm) | 4.5 mm | 2,347 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.9 in (305 × 201 mm) | 6.7 mm | 3,520 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give It to God and Go to Sleep SVG files
-
Give It to God in Alfa Slab One Solid · 22 pieces
-
Give It to God in Amatic SC Solid · 23 pieces
-
Give It to God in block capitals Solid · 23 pieces
-
Give It to God in script and capitals Solid · 21 pieces
-
Give It to God with hearts Solid · 21 pieces
-
Give It to God outline lettering Outline · 24 pieces
-
Give It to God stencil plate Solid · one piece
-
Give It to God with a drop shadow Layered · 19 pieces
← Give It to God in Kaushan Script All 13 Give It to God and Go to Sleep designs Give It to God in Alfa Slab One →