Free Give It to God and Go to Sleep SVG

Give It to God in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Give It to God in Lobster, as a solid black shape
Give It to God in Lobster. The preview is the SVG file itself.

“Give It to God and Go to Sleep” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces15 separate pieces
Outlines to cut26: 15 outer edges and 11 cut-outs
Cut length1,549 mm at this size
Narrowest part0.9 mm at this size
Nodes470 curve and line segments

Measured from the file. PNG: 2,000 × 1,806 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.23 mm393 mm110Too fine for most machines
2 × 1.8 in (51 × 46 mm)0.46 mm787 mm30Too fine for most machines
3 × 2.7 in (76 × 69 mm)0.69 mm1,180 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.6 in (102 × 91 mm)0.91 mm1,574 mm6Fine detail: vinyl and paper only, weed with care
6 × 5.39 in (152 × 137 mm)1.4 mm2,361 mm2Vinyl, card and thin sheet
8 × 7.19 in (203 × 183 mm)1.8 mm3,148 mm1Vinyl, card and thin sheet
12 × 10.79 in (305 × 274 mm)2.7 mm4,721 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Give It to God and Go to Sleep SVG files

← Give It to God in Pacifico All 13 Give It to God and Go to Sleep designs Give It to God in Kaushan Script →