Free flip flop SVG

Zentangle flip flop SVG

Zentangle flip flop, as a solid black shape — Zentangle flip flop. The preview is the SVG file itself.

A single sole filled with four bands of doodled pattern: dots at the toes, waves under the strap, zigzags across the arch and a flower on the heel. All of it is cut out as holes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	42 × 100 mm (1.64 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	38: 1 outer edge and 37 cut-outs
Cut length	1,192 mm at this size
Narrowest part	1.7 mm at this size
Nodes	652 curve and line segments

Measured from the file. PNG: 877 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.42 × 1 in (11 × 25 mm)	0.43 mm	303 mm	190	Too fine for most machines
0.83 × 2 in (21 × 51 mm)	0.86 mm	606 mm	55	Fine detail: vinyl and paper only, weed with care
1.25 × 3 in (32 × 76 mm)	1.3 mm	908 mm	24	Vinyl, card and thin sheet
1.66 × 4 in (42 × 102 mm)	1.7 mm	1,211 mm	12	Vinyl, card and thin sheet
2.5 × 6 in (63 × 152 mm)	2.6 mm	1,817 mm	4	Vinyl, card and thin sheet
3.33 × 8 in (85 × 203 mm)	3.5 mm	2,422 mm	3	Any material, including 3 mm wood and acrylic
4.99 × 12 in (127 × 305 mm)	5.2 mm	3,633 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flip flop SVG files

← Flip flops with a flower All 12 flip flops Flip flops with a starfish →