Free flip flop SVG

Flip flop with a palm tree SVG

Flip flop with a palm tree, as a solid black shape — Flip flop with a palm tree. The preview is the SVG file itself.

One flip flop tipped to the left, with a palm tree and a low sun cut out of the heel half of the sole. A small beach scene to back with orange or yellow.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	54 × 100 mm (2.11 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	539 mm at this size
Narrowest part	2.3 mm at this size
Nodes	109 curve and line segments

Measured from the file. PNG: 1,110 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.54 × 1 in (14 × 25 mm)	0.58 mm	137 mm	160	Fine detail: vinyl and paper only, weed with care
1.07 × 2 in (27 × 51 mm)	1.2 mm	274 mm	45	Vinyl, card and thin sheet
1.61 × 3 in (41 × 76 mm)	1.8 mm	411 mm	18	Vinyl, card and thin sheet
2.15 × 4 in (55 × 102 mm)	2.3 mm	548 mm	10	Vinyl, card and thin sheet
3.22 × 6 in (82 × 152 mm)	3.5 mm	821 mm	3	Any material, including 3 mm wood and acrylic
4.3 × 8 in (109 × 203 mm)	4.7 mm	1,095 mm	2	Any material, including 3 mm wood and acrylic
6.44 × 12 in (164 × 305 mm)	7 mm	1,643 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flip flop SVG files

← Crossed flip flops All 12 flip flops Layered flip flops with flowers →