Free flip flop SVG

Flip flops with a flower SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Flip flops with a flower, as a solid black shape
Flip flops with a flower. The preview is the SVG file itself.

A pair with a plumeria flower sitting on each strap where it meets the toe post. The petals overhang the strap and are welded to the sole, so each sandal is still one piece.

What is in the file

Size100 × 85 mm (3.94 × 3.33 in), scales to any size
Pieces2 separate pieces
Outlines to cut8: 2 outer edges and 6 cut-outs
Cut length745 mm at this size
Narrowest part1.9 mm at this size
Nodes167 curve and line segments
SymmetryMirror
Also found asFlipflop SVG

Measured from the file. PNG: 2,000 × 1,706 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.48 mm189 mm110Too fine for most machines
2 × 1.69 in (51 × 43 mm)0.97 mm378 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.54 in (76 × 65 mm)1.4 mm568 mm12Vinyl, card and thin sheet
4 × 3.39 in (102 × 86 mm)1.9 mm757 mm6Vinyl, card and thin sheet
6 × 5.08 in (152 × 129 mm)2.9 mm1,135 mm2Vinyl, card and thin sheet
8 × 6.78 in (203 × 172 mm)3.9 mm1,514 mm1Any material, including 3 mm wood and acrylic
12 × 10.16 in (305 × 258 mm)5.8 mm2,271 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flip flop SVG files

← Striped flip flops All 12 flip flops Zentangle flip flop →