Free flip flop SVG

Single flip flop SVG

Single flip flop, as a solid black shape — Single flip flop. The preview is the SVG file itself.

One flip flop at a tilt, with a line cut round the footbed just inside the edge as well as the strap. The line is broken at the toe and heel so the middle stays attached.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	52 × 100 mm (2.04 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	732 mm at this size
Narrowest part	2.3 mm at this size
Nodes	127 curve and line segments

Measured from the file. PNG: 1,071 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.52 × 1 in (13 × 25 mm)	0.58 mm	186 mm	170	Fine detail: vinyl and paper only, weed with care
1.03 × 2 in (26 × 51 mm)	1.2 mm	372 mm	45	Vinyl, card and thin sheet
1.55 × 3 in (39 × 76 mm)	1.8 mm	558 mm	18	Vinyl, card and thin sheet
2.07 × 4 in (53 × 102 mm)	2.3 mm	744 mm	10	Vinyl, card and thin sheet
3.1 × 6 in (79 × 152 mm)	3.5 mm	1,116 mm	3	Any material, including 3 mm wood and acrylic
4.14 × 8 in (105 × 203 mm)	4.7 mm	1,487 mm	2	Any material, including 3 mm wood and acrylic
6.2 × 12 in (158 × 305 mm)	7 mm	2,231 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flip flop SVG files

← Pair of flip flops All 12 flip flops Flip flops outline →