Free flip flop SVG

Pair of flip flops SVG

Pair of flip flops, as a solid black shape — Pair of flip flops. The preview is the SVG file itself.

A left and a right flip flop seen from above, toes turned a little outwards. The Y strap is cut out of each sole and stops short of the edge, so each sandal is one solid piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 94 mm (3.94 × 3.69 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	675 mm at this size
Narrowest part	2.1 mm at this size
Nodes	140 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,881 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.94 in (25 × 24 mm)	0.53 mm	171 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.88 in (51 × 48 mm)	1.1 mm	343 mm	25	Vinyl, card and thin sheet
3 × 2.81 in (76 × 71 mm)	1.6 mm	514 mm	12	Vinyl, card and thin sheet
4 × 3.75 in (102 × 95 mm)	2.1 mm	686 mm	6	Vinyl, card and thin sheet
6 × 5.63 in (152 × 143 mm)	3.2 mm	1,029 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.5 in (203 × 191 mm)	4.3 mm	1,372 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.26 in (305 × 286 mm)	6.4 mm	2,057 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flip flop SVG files

← Layered flip flops with flowers All 12 flip flops Single flip flop →