Free fish SVG

Classic fish with scales SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Classic fish with scales, as a solid black shape
Classic fish with scales. The preview is the SVG file itself.

A deep-bodied fish in side view with a forked tail, a sail of a dorsal fin, a gill slit, a side fin and rows of scales cut as small arcs. One piece, facing right.

What is in the file

Size100 × 65 mm (3.94 × 2.54 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length740 mm at this size
Narrowest part1.1 mm at this size
Nodes321 curve and line segments

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.28 mm188 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.56 mm376 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)0.84 mm564 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.58 in (102 × 66 mm)1.1 mm752 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 98 mm)1.7 mm1,128 mm2Vinyl, card and thin sheet
8 × 5.17 in (203 × 131 mm)2.2 mm1,504 mm2Vinyl, card and thin sheet
12 × 7.75 in (305 × 197 mm)3.4 mm2,256 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Three little fish All 21 fish Fish silhouette →