Free fish SVG

Bass fish jumping for a hook SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bass fish jumping for a hook, as a solid black shape
Bass fish jumping for a hook. The preview is the SVG file itself.

A largemouth bass leaps out of a line of ripples with a hook through its lower lip and the line running straight up. One piece: hook, line, bass and water are welded.

What is in the file

Size90 × 100 mm (3.53 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length814 mm at this size
Narrowest part1.1 mm at this size
Nodes275 curve and line segments
Also found asBass fishing SVG

Measured from the file. PNG: 1,802 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.9 × 1 in (23 × 25 mm)0.28 mm207 mm110Too fine for most machines
1.79 × 2 in (46 × 51 mm)0.56 mm414 mm30Fine detail: vinyl and paper only, weed with care
2.69 × 3 in (68 × 76 mm)0.84 mm620 mm12Fine detail: vinyl and paper only, weed with care
3.59 × 4 in (91 × 102 mm)1.1 mm827 mm6Vinyl, card and thin sheet
5.38 × 6 in (137 × 152 mm)1.7 mm1,241 mm2Vinyl, card and thin sheet
7.18 × 8 in (182 × 203 mm)2.2 mm1,654 mm1Vinyl, card and thin sheet
10.76 × 12 in (273 × 305 mm)3.4 mm2,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Fishing bobber All 21 fish Three little fish →