Free fish SVG

Fishing bobber SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fishing bobber, as a solid black shape
Fishing bobber. The preview is the SVG file itself.

A round float with a solid top half and an open bottom half, a peg above and a line ring below. Cut the top in red and back the bottom with white.

What is in the file

Size61 × 100 mm (2.39 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length518 mm at this size
Narrowest part3.4 mm at this size
Nodes50 curve and line segments
SymmetryMirror
Also found asFish bobber SVG

Measured from the file. PNG: 1,244 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.61 × 1 in (15 × 25 mm)0.86 mm132 mm150Fine detail: vinyl and paper only, weed with care
1.21 × 2 in (31 × 51 mm)1.7 mm263 mm40Vinyl, card and thin sheet
1.82 × 3 in (46 × 76 mm)2.6 mm395 mm18Vinyl, card and thin sheet
2.43 × 4 in (62 × 102 mm)3.5 mm526 mm8Any material, including 3 mm wood and acrylic
3.64 × 6 in (93 × 152 mm)5.2 mm789 mm3Any material, including 3 mm wood and acrylic
4.86 × 8 in (123 × 203 mm)6.9 mm1,053 mm2Any material, including 3 mm wood and acrylic
7.28 × 12 in (185 × 305 mm)10 mm1,579 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fish SVG files

← Fishing lure with treble hooks All 21 fish Bass fish jumping for a hook →