Free feather SVG

Feather earrings, a matching pair SVG

Feather earrings, a matching pair, as a solid black shape
Feather earrings, a matching pair. The preview is the SVG file itself.

Two mirrored feathers hanging tip down, each with a round tab and a hole for the hook, and splits along the edges that let leather or faux leather fringe. Two separate pieces.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size55 × 100 mm (2.15 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length979 mm at this size
Narrowest part2 mm at this size
Nodes170 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,127 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.55 × 1 in (14 × 25 mm)0.51 mm249 mm160Fine detail: vinyl and paper only, weed with care
1.09 × 2 in (28 × 51 mm)1 mm497 mm45Vinyl, card and thin sheet
1.64 × 3 in (42 × 76 mm)1.5 mm746 mm18Vinyl, card and thin sheet
2.18 × 4 in (55 × 102 mm)2 mm995 mm10Vinyl, card and thin sheet
3.28 × 6 in (83 × 152 mm)3 mm1,492 mm3Any material, including 3 mm wood and acrylic
4.37 × 8 in (111 × 203 mm)4.1 mm1,989 mm2Any material, including 3 mm wood and acrylic
6.55 × 12 in (166 × 305 mm)6.1 mm2,984 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More feather SVG files

← Arrow with a feather All 14 feathers Two crossed feathers →